RoHS, Directive 2011/65/EU, limits ten hazardous substances in electrical and electronic products sold in the EU, and the maker must document that, sign a declaration and add the CE mark before the product goes on sale.
For most sellers that means showing that each material in a product stays under the limits, with no certificate to apply for. Below is what RoHS requires, which products it covers, how to meet it in six steps and which lead exemptions run out in 2026 and 2027.
Where your company is based decides who answers for RoHS in the EU.
Is your company established in the EU?
Pick your answer below for the right guidance.
RoHS in one table
These seven facts frame every requirement on this page.
| Fact | RoHS |
|---|---|
| Official name | Directive 2011/65/EU on the restriction of hazardous substances in electrical and electronic equipment |
| Type of law | A directive, so each EU country has its own RoHS law, due by 2 January 2013 |
| Products | Electrical and electronic equipment up to 1,000 volts AC or 1,500 volts DC, in 11 categories |
| The limit | 0.1% by weight for nine substances and 0.01% for cadmium, in each material |
| Who must act | Manufacturers, authorised representatives, importers and distributors |
| The proof | Technical documentation, an EU declaration of conformity and the CE mark |
| Last changed | Three lead exemption updates published on 21 November 2025 and applied from 1 July 2026 |
The rules come from EUR-Lex's consolidated text of the RoHS Directive and the European Commission's RoHS Directive page. For a short definition, see the glossary entry on the RoHS Directive.
The ten substances RoHS limits
Electrical and electronic equipment placed on the EU market must not contain the substances in Annex II above their limits (article 4). The rule also covers cables, and the spare parts used to repair, reuse or upgrade a product.
The European Commission sorts the ten into three groups: four heavy metals (lead, mercury, cadmium and hexavalent chromium), two flame retardants (PBB and PBDE) and four plasticisers (the phthalates).
| Substance | Limit |
|---|---|
| Lead | 0.1% |
| Mercury | 0.1% |
| Cadmium | 0.01% |
| Hexavalent chromium | 0.1% |
| Polybrominated biphenyls (PBB) | 0.1% |
| Polybrominated diphenyl ethers (PBDE) | 0.1% |
| Bis(2-ethylhexyl) phthalate (DEHP) | 0.1% |
| Butyl benzyl phthalate (BBP) | 0.1% |
| Dibutyl phthalate (DBP) | 0.1% |
| Diisobutyl phthalate (DIBP) | 0.1% |
The four phthalates were added later, by Delegated Directive (EU) 2015/863. They have applied to most products since 22 July 2019, and to medical devices and monitoring and control instruments since 22 July 2021.
Where the RoHS limit is measured
The limit is not an average over the whole product. It applies to each homogeneous material, meaning one material of the same make-up throughout, or a mix that cannot be taken apart by unscrewing, cutting, crushing or grinding (article 3(20)).

So a small amount of lead in one solder joint can break the rule even when the product as a whole holds far less than 0.1% lead. That is why the work starts with a list of every material, not with the finished product.
Products RoHS covers and the ones it leaves out
RoHS covers equipment that needs electric current or electromagnetic fields for at least one of its intended functions, up to 1,000 volts AC and 1,500 volts DC (article 3). Annex I sorts it into 11 categories.
- Large household appliances
- Small household appliances
- IT and telecommunications equipment
- Consumer equipment
- Lighting equipment
- Electrical and electronic tools
- Toys, leisure and sports equipment
- Medical devices
- Monitoring and control instruments
- Automatic dispensers
- Any other electrical or electronic equipment
Category 11 is the catch-all and has applied since 22 July 2019. As the European Commission puts it, every product with an electrical or electronic component must comply unless it is specifically excluded.
What RoHS leaves out
Article 2(4) lists the exclusions, and they are narrower than most sellers expect.
- Military and space: arms and military equipment, and equipment designed to be sent into space.
- Large installations: large-scale stationary industrial tools and large-scale fixed installations, installed and removed by professionals.
- Transport: vehicles for people or goods, except electric two-wheelers that are not type-approved, which stay in.
- Professional machinery: non-road mobile machinery made available only for professional use.
- Special cases: active implantable medical devices, professionally installed solar panel systems, research equipment sold only between businesses, and pipe organs.
Electric two-wheelers are the exclusion that catches sellers out. A car is outside RoHS, but an e-scooter that is not type-approved counts as electrical equipment like any other and stays in.

RoHS also applies on top of REACH, the EU chemicals regulation (article 2(3)). Meeting one does not settle the other, as the glossary entry on REACH explains.
Who answers for RoHS in your case
The duties follow a company's role. The manufacturer makes the product, or has it made and sells it under its own name or brand.
Established in the EU. If your company makes the product or sells it under its own brand, the manufacturer's duties below are yours, whoever built it.
If you buy the product from outside the EU and place it on the EU market, you are the importer. You carry the importer's checks and put your own name and address on it.
Selling from outside the EU. The manufacturer's duties still apply to you, and an EU company must also answer for every RoHS product you sell there.
RoHS is on the list in article 4 of the Market Surveillance Regulation (EU) 2019/1020, so that company is your EU importer or an authorised representative with a written mandate. Failing both, it is an EU fulfilment provider for the products it handles.
It keeps your declaration of conformity for the authorities, and its name and postal address go on the product, its packaging, the parcel or an accompanying document.
Six steps to meet RoHS before you sell
The steps below take a manufacturer from a product idea to a product that may carry the CE mark for RoHS. Importers and distributors check the result instead of doing the work.
Step 1. Confirm the product is in scope
Two questions settle it. Does the product need electricity for at least one function, and does it fall outside every exclusion in article 2(4)?
Write the answer down with the reason. It opens your technical documentation and saves the same debate every time a buyer or an authority asks.
- In scope: note the Annex I category, because exemption periods differ by category.
- Out of scope: note the exclusion you rely on, quoted from article 2(4), not paraphrased.
Step 2. List every material and what it contains
Break the product down into its homogeneous materials: the plastics, metals, coatings, solders, glues and cable sheaths. Each one is checked against Annex II on its own.
In practice that list is built with your suppliers. Ask each of them which of the ten substances its part contains and in what amount, and keep their answers with the parts list.
Where an answer is missing or doubtful, a laboratory test fills the gap. Products tested or assessed against harmonised standards published in the EU's Official Journal are presumed to comply (article 16(2)).
Step 3. Check every exemption you rely on
Some uses of a restricted substance are allowed for a set period. Annex III lists exemptions for all categories, and Annex IV adds more for medical devices and monitoring and control instruments (article 4(6)).
If a material only passes thanks to an exemption, record three things.
- The exemption number: for example 6(c), copper alloy with up to 4% lead.
- Your category: many exemptions end on different dates for different Annex I categories.
- The expiry date: taken from the newest consolidated text on EUR-Lex, checked again before each production run.
Step 4. Build the technical documentation
RoHS uses module A, internal production control (article 7(b)). The manufacturer checks the product itself, and no notified body takes part.
The technical documentation is the file that proves the product meets article 4. For RoHS it typically holds a description of the product, the material list from step 2, the supplier answers and test reports behind it, and any exemptions from step 3.
Where another CE law already needs a procedure at least as strict, RoHS can be shown inside that procedure with one single set of technical documentation (article 7(c)). Keep it for 10 years after the product is placed on the market (article 7(d)).
Step 5. Sign the declaration and add the CE mark
The EU declaration of conformity is the signed statement that the product meets article 4. By signing it, the manufacturer takes responsibility for the product (article 13). Annex VI sets what it contains.

The declaration is kept up to date and translated into the language each EU country requires (article 13(2)).
Then the CE mark goes on the finished product or its data plate, before the product is placed on the market (article 15). The product also carries a type, batch or serial number and the manufacturer's name and contact address (article 7(g) and (h)).
Step 6. Keep the product compliant after launch
The declaration speaks for the product as it is made, so a change of supplier, material or standard means checking again (article 7(e)).
The manufacturer also keeps a register of products that do not comply and of recalls, and keeps distributors informed (article 7(f)). When a product turns out not to comply, the manufacturer fixes it, withdraws it or recalls it, and tells the national authorities straight away (article 7(i)).
On request, the manufacturer hands an authority every document needed to prove compliance, in a language that authority understands (article 7(j)).
What importers and distributors check before selling
RoHS gives the other companies in the chain a shorter list of checks (articles 9 to 11).
- Importers: place only compliant products on the market, check that the assessment was done, that the technical documentation exists and that the CE mark and documents are in place, add their own name and address and keep a copy of the declaration for 10 years.
- Distributors: check the CE mark, the documents in the buyer's language and the names and addresses before selling, and hold back a product they believe does not comply.
- Own-brand sellers: an importer or distributor that sells under its own name, or changes a product in a way that can affect compliance, takes on every manufacturer duty above.
Every company in the chain must also be able to say, for 10 years, who supplied it and whom it supplied (article 12).
Lead exemptions ending in 2026 and 2027
Three delegated directives published on 21 November 2025 rewrote the main lead exemptions in Annex III. EU countries had to apply them from 1 July 2026, and they split the old broad entries into narrower ones with fixed end dates.

The table below gives the main end dates. Several sub-entries end on different dates per product category, so check your own category in Annex III.
| Date | What ends |
|---|---|
| 11 December 2026 | Exemption 6(a), lead in machining steel and galvanised steel up to 0.35%. Two narrower entries, 6(a)-I and 6(a)-II, take over |
| 11 June 2027 | Exemption 6(b), lead in aluminium up to 0.4%. Narrower entries 6(b)-I to 6(b)-III run to dates between December 2026 and June 2027 by category |
| 30 June 2027 | 6(a)-I and 6(a)-II for steel, 6(c) for copper alloy with up to 4% lead, 7(a) for high melting point solders and 7(c)-I for lead in glass or ceramic components |
| 31 December 2027 | The narrower solder entries 7(a)-I to 7(a)-VII and the glass and ceramic entries 7(c)-II and 7(c)-V |
These dates can still move. An exemption stays valid past its date while a renewal application made at least 18 months before expiry is being decided (article 5(5)).
If a renewal is refused, the exemption ends 12 to 18 months after that decision (article 5(6)). Check the current consolidated Annex III on EUR-Lex before you plan around a date.
The new lead alloy entries also exclude consumer products, or parts of them, that children could put in their mouths, unless the lead released stays below a set rate (Annex III, footnote 4).
Checks and fines under RoHS
National market surveillance authorities enforce RoHS in each EU country (article 18). A product with the CE mark is presumed to comply until there is evidence to the contrary (article 16), so an authority can still check it and ask for the technical documentation.
There is no EU fine for RoHS. Each country sets its own penalties, which must be effective, proportionate and dissuasive (article 23). Misuse of the CE mark can also bring criminal sanctions in serious cases (article 15(3)).
These are four gaps worth looking for in your own products.
- A missing file: the CE mark is on, but there is no technical documentation behind it.
- An expired exemption: a material still relies on an exemption that has ended for that category.
- A changed supplier: a new part arrived after the declaration was signed and was never checked.
- No EU contact: a product sold from outside the EU without an EU company named on it.
A good first check today is to list the exemptions your products rely on and compare their end dates with the table above.
Where Repax fits next to RoHS
RoHS is the manufacturer's work, and only parts of it can be handed to an authorised representative. The same products also bring separate extended producer responsibility (EPR) duties: the electronics fall under the EU's WEEE rules, and their packaging and any batteries carry duties of their own.
Those EPR duties mean a registration, reports and fees in each EU country where you sell, as the guide to EPR registration in Europe explains.
Repax does not test products for restricted substances, build RoHS technical documentation, sign declarations of conformity or act as an authorised representative under RoHS. Those stay with the manufacturer and its EU partners.
Selling in more countries than you're registered in?
Bring your list of countries to a 30-minute call. We show you what each one asks of you, and what Repax EPR takes off your desk.
- How many EU markets do you sell into?
- Do you import from outside the EU?
Frequently asked questions about RoHS
Below are the eight questions sellers ask most about what RoHS requires.
What is RoHS?
RoHS is EU Directive 2011/65/EU on hazardous substances in electrical and electronic equipment. It limits ten substances, including lead, mercury and cadmium, in each material of a product, and each EU country had to write it into national law by 2 January 2013.
Is there a RoHS certificate?
No. RoHS uses internal production control, so the manufacturer checks the product, keeps the technical documentation and signs an EU declaration of conformity itself. A lab report or a supplier statement is evidence for that file, not a certificate that replaces it.
Which substances does RoHS restrict?
Lead, mercury, hexavalent chromium, PBB, PBDE and the four phthalates DEHP, BBP, DBP and DIBP are limited to 0.1% by weight, and cadmium to 0.01%. The limits apply to each homogeneous material in the product, not to the product as a whole.
Does RoHS apply to companies outside the EU?
Yes, to every product they sell into the EU. The manufacturer's duties apply wherever it is based, and the Market Surveillance Regulation also requires an EU importer, authorised representative or fulfilment provider to answer to the authorities for each product.
Do cables and spare parts have to meet RoHS?
Yes. The limits cover cables and the spare parts used to repair, reuse or upgrade a product. Spare parts for older equipment placed on the market before the relevant RoHS date can be exempt, under the conditions in article 4(4) and (5).
How is RoHS different from REACH?
RoHS limits ten substances in electrical and electronic equipment only. REACH is the EU's general chemicals regulation, and RoHS applies without prejudice to it under article 2(3), so a product can need to meet both and meeting one does not prove the other.
Are the RoHS lead exemptions ending?
Several are. Updates applied from 1 July 2026 set end dates for the main lead exemptions in steel, aluminium, copper alloy, solders, glass and ceramics, falling between 11 December 2026 and 31 December 2027, depending on the entry and the product category.
Who sets the fines for breaking RoHS?
Each EU country. The directive names no amount, only that penalties must be effective, proportionate and dissuasive. National market surveillance authorities enforce it, and penalties for serious misuse of the CE mark may include criminal sanctions.
