What is the EMC Directive?

Frederik Kiel Frederik Kiel
12 min read

Most electrical and electronic products sold in the EU must keep the interference they send out low and keep working through the interference around them. This guide explains what Directive 2014/30/EU covers, how it differs from the Radio Equipment Directive, the six steps to the CE mark and what changed in 2026.

A washing machine giving off interference waves, labelled EMC 2014/30/EU on its control panel, for an article on what the EU EMC Directive is

If you sell electrical or electronic products in the EU, the EMC Directive, Directive 2014/30/EU, requires most of them to keep their own interference low and keep working through the interference around them, backed by a declaration and the CE mark.

The manufacturer can always check the product itself, with test reports behind it and no certificate to apply for. Below is what the directive requires, which products it covers, how to meet it in six steps and what changed in 2026.

Where your company is based decides who answers for EMC in the EU.

The EMC Directive in short

These are the facts every requirement on this page rests on.

  • The law. Directive 2014/30/EU on electromagnetic compatibility, usually called the EMC Directive. It has applied since 20 April 2016 and replaced the earlier EMC Directive 2004/108/EC.
  • What EMC means. A product works properly where it is used, without sending out interference that other equipment cannot cope with (article 3(1)(4)).
  • Type of law. A directive, so each EU country turns it into its own national law.
  • Products. Equipment that can cause electromagnetic interference or be affected by it, from washing machines to factory installations. Radio products such as Wi-Fi or Bluetooth devices follow the Radio Equipment Directive instead.
  • The proof. Technical documentation, an EU declaration of conformity and the CE mark, from the manufacturer's own assessment or, by choice, a notified body's examination.
  • Last changed. Directive (EU) 2024/2749 added emergency rules that EU countries have applied since 30 May 2026. They only switch on in an EU crisis.

The rules on this page come from EUR-Lex's consolidated text of the EMC Directive and the European Commission's EMC Directive page.

Two things every product must do under the EMC Directive

Electrical devices affect each other when they sit close together or share a power line. The European Commission's own example is interference between TV sets, mobile phones, radios and a washing machine nearby.

The EMC Directive keeps those side effects under control with two essential requirements in Annex I (article 6).

  1. Low emissions. The interference a product sends out must stay below the level at which radios, telecoms and other equipment stop working as intended (Annex I, point 1(a)).
  2. Enough immunity. The product must cope with the interference it can expect in normal use, without an unacceptable drop in how it works (Annex I, point 1(b)).

Diagram of the two requirements in the EU EMC Directive: a washing machine sending only weak interference towards a radio, and the same washing machine running normally while interference from a power line reaches it

Both are judged against the state of the art, and the directive itself sets no figures. The limits and test methods sit in harmonised standards.

A product that meets standards whose references are published in the EU's Official Journal is presumed to meet the requirements those standards cover (article 13).

A product only has to pass when it is installed, maintained and used as intended (article 4). That is why the instructions matter as much as the circuit board.

Equipment the EMC Directive covers

The directive covers equipment, meaning apparatus as well as fixed installations (article 3(1)(1)). Apparatus is a finished product sold to an end user as one working unit that can cause interference or be affected by it (article 3(1)(2)).

Article 3 also treats some things that are not finished products as apparatus.

  • Components and sub-assemblies: parts the end user fits into a product, when they can cause or suffer interference.
  • Mobile installations: combinations of apparatus that are moved and used in different places.

Fixed installations, such as a production line installed for good on one site, are set up with good engineering practice and the documentation is kept for as long as they run (article 19). Most of this page is about apparatus, the products that are sold.

Five exclusions from the EMC Directive

Article 2(2) names five kinds of equipment the directive does not cover.

  1. Radio equipment: products covered by the radio equipment rules, now the Radio Equipment Directive 2014/53/EU.
  2. Aircraft equipment: equipment for use only in the air that falls under the EU aviation regulation (EU) 2018/1139.
  3. Amateur radio kit: equipment used by radio amateurs, unless it is sold.
  4. Inherently harmless equipment: products that by nature cannot cause disturbing interference and are not affected by it.
  5. Evaluation kits: custom-built kits for professionals, used only at research and development sites.

Where another EU law sets the EMC requirements for a product more specifically, the EMC Directive steps back for those requirements (article 2(3)).

Products with Wi-Fi or Bluetooth follow the Radio Equipment Directive

Radio equipment is a product that intentionally sends or receives radio waves to communicate or to locate something (Radio Equipment Directive, article 2(1)(1)). A smart speaker, a phone or a Wi-Fi router is radio equipment.

These products are outside the EMC Directive, but they do not escape its requirements. The Radio Equipment Directive requires an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU (article 3(1)(b)), so the same limits apply through a different law.

Diagram of which EU law covers a product's electromagnetic compatibility: a washing machine, an LED floodlight and an induction hob under the EMC Directive, and a phone, a Wi-Fi router and a smart speaker under the Radio Equipment Directive, which still applies the EMC requirements

The declaration of conformity then names the Radio Equipment Directive. When one product falls under several EU laws that each need a declaration, the manufacturer draws up one single declaration for all of them (article 15(3)).

Who answers for EMC in your case

The duties follow a company's role. The manufacturer makes the product, or has it made and sells it under its own name or brand (article 3(1)(11)).

Established in the EU. If your company makes the product or sells it under its own brand, the manufacturer's duties in the steps below are yours, whoever built it.

If you buy the product from outside the EU and place it on the EU market, you are the importer. You carry the importer's checks and put your own name and postal address on it.

Selling from outside the EU. The manufacturer's duties still apply to you, and an EU company must also answer for every EMC product you sell there.

The EMC Directive is on the list in article 4 of the Market Surveillance Regulation (EU) 2019/1020, so that company is your EU importer or an authorised representative with a written mandate. Failing both, it is an EU fulfilment provider for the products it handles.

It keeps your declaration of conformity for the authorities, and its name and postal address go on the product, its packaging, the parcel or an accompanying document.

Six steps from design to CE mark under the EMC Directive

The steps below take a manufacturer from a product idea to a product that may carry the CE mark for EMC. Importers and distributors check the result instead of doing the work.

Step 1. Confirm the product is in scope

Work through these questions and write down each answer with the reason. The note opens your technical documentation.

  • Is it equipment? It is a finished product, component or installation that can cause interference or be affected by it.
  • Is it radio equipment? If it sends or receives radio waves on purpose, it goes under the Radio Equipment Directive instead.
  • Is it excluded? Check each exclusion in article 2(2) and quote the one you rely on.

Step 2. Assess the product's interference and immunity

The manufacturer carries out an EMC assessment of the product, based on the electromagnetic effects that matter for it (Annex II, point 2). It covers all normal operating conditions, and every set-up the manufacturer lists as typical of how the product is used.

The assessment rests on what the product sends out and how it behaves under interference. Test reports are one of the items the technical documentation must hold, and harmonised standards supply test methods that bring the presumption of conformity in article 13.

Where you use no harmonised standard, or only part of one, you describe the solutions you used instead (Annex II, point 3(d)).

Step 3. Choose your route to conformity

Article 14 gives two routes, and the manufacturer chooses. Internal production control, module A, is always enough under the EMC Directive.

Route Who checks What you get
Module A You, with no outside body (Annex II) Your own declaration
Modules B and C A notified body you choose (Annex III) A type certificate, then your declaration

The manufacturer can also use the notified body for some requirements only, and module A for the rest (article 14).

Step 4. Build the technical documentation

The technical documentation is the file that proves the product meets the directive. It includes a risk analysis and, where they apply, at least six items (Annex II, point 3).

  1. A general description of the product
  2. Design and manufacturing drawings of components, sub-assemblies and circuits
  3. Explanations needed to understand those drawings and how the product works
  4. The harmonised standards applied, or the other solutions used
  5. Design calculations and examinations carried out
  6. Test reports

Keep it, with the declaration, for 10 years after the product is placed on the market (article 7(3)).

Step 5. Sign the declaration and mark the product

The EU declaration of conformity states that the essential requirements have been met. It follows the model in Annex IV, is kept up to date and is translated into the language each EU country requires (article 15).

By drawing it up, the manufacturer takes responsibility for the product (article 15(4)). The declaration names the model, the manufacturer, the EU laws it covers, the standards used with their dates and any notified body, and it is signed.

Then the product itself is marked before it goes on sale.

Diagram of what goes on a product under the EU EMC Directive: a washing machine with a rating plate carrying the CE mark, the maker's name and address, the importer's name and address and a type or serial number, next to instructions in the buyer's language

Each mark has its own article.

  • The CE mark: visible, legible and permanent on the product or its data plate, or on the packaging and documents where that is not possible (article 17).
  • An identifier: a type, batch or serial number (article 7(5)).
  • Your contact details: name or trade mark and one postal address where you can be reached (article 7(6)).
  • Instructions: in a language the buyer understands, with any precautions for assembly, installation, maintenance or use (articles 7(7) and 18).

A product that does not meet the requirements in homes and other residential areas must say so clearly, where appropriate on the packaging too (article 18(2)).

Step 6. Keep the product compliant after launch

Series production must keep matching the documentation. Changes to the design, or to the standards you relied on, mean checking again (article 7(4)).

When a product turns out not to comply, the manufacturer fixes it, withdraws it or recalls it. If it presents a risk, the manufacturer tells the national authorities straight away (article 7(8)).

On a reasoned request, the manufacturer hands an authority every document needed to prove compliance, in a language that authority understands (article 7(9)).

What importers and distributors check before selling

The EMC Directive gives the other companies in the chain a shorter list of checks (articles 9 to 11).

  • Importers: place only compliant products on the market, check that the assessment was done, that the documentation exists and that the CE mark, documents and manufacturer details are in place, add their own name and postal address and keep a copy of the declaration for 10 years.
  • Distributors: check the CE mark, the documents and instructions in the buyer's language and the names and addresses before selling, and hold back a product they believe does not comply.
  • Own-brand sellers: an importer or distributor that sells under its own name, or changes a product in a way that can affect compliance, takes on every manufacturer duty above.

Every company in the chain must be able to say, for 10 years, who supplied it and whom it supplied (article 12).

EMC Directive dates from 2016 to 2026

The current directive has applied for ten years, so its core rules are settled. These are the dates that shaped it.

Date What happened
19 April 2016 Deadline for EU countries to write the directive into national law (article 44)
20 April 2016 The directive applied and replaced Directive 2004/108/EC (articles 44 and 45)
21 May 2025 The European Commission proposed changes on digitalisation and common specifications, COM(2025) 503
30 May 2026 Emergency rules from Directive (EU) 2024/2749 applied, in a new chapter 5a

Products that met the old directive and were placed on the market before 20 April 2016 may still be sold (article 43).

The 2026 emergency rules only apply when the EU has switched on its internal market emergency mode and named a product as crisis-relevant.

The Commission can then point to other standards or common specifications that a product can meet instead (articles 40a and 40b). For a normal product nothing in the CE process changed.

The 2025 proposal would change the EMC Directive and twelve other product directives. As of October 2026 it has not changed the directive's text, so treat it as a proposal only.

Penalties and recalls under the EMC Directive

National market surveillance authorities check EMC products in each EU country. When one finds a product that does not comply, it requires the company to fix it, withdraw it or recall it within a reasonable period (article 38(1)).

The fix must cover every unit the company has sold anywhere in the EU, not only in that country (article 38(3)). If the company does not act, the authority can ban, withdraw or recall the product itself (article 38(4)).

A product can also be stopped for paperwork alone, even when it causes no interference at all (article 40). These are the formal gaps an authority looks for.

  1. The CE mark: missing, or put on the wrong way.
  2. The declaration: never drawn up, or drawn up incorrectly.
  3. The documentation: not available, or incomplete.
  4. The contact details: the manufacturer's or importer's name and address missing, false or incomplete.

There is no EU fine for the EMC Directive. Each country sets its own penalties, which must be effective, proportionate and dissuasive, and may include criminal penalties for serious breaches (article 42).

A good first check today is to open the declaration for your best-selling electrical product and confirm it names the right EU laws and dated standards.

Where Repax fits next to the EMC Directive

The EMC Directive is the manufacturer's work, and only parts of it can be handed to an authorised representative.

The same products also carry extended producer responsibility (EPR) duties: the electronics fall under the EU's WEEE rules, and their packaging and any batteries carry duties of their own.

Those EPR duties mean a registration, reports and fees in each EU country where you sell, as the guide to EPR registration in Europe explains.

Repax does not test products for EMC, build technical documentation, sign declarations of conformity or act as an authorised representative under the EMC Directive. That work stays with the manufacturer, its test lab and its EU partners.

Selling in more countries than you're registered in?

Bring your list of countries to a 30-minute call. We show you what each one asks of you, and what Repax EPR takes off your desk.

Frequently asked questions about the EMC Directive

Below are the eight questions sellers ask most about the EMC Directive.

What is the EMC Directive?

The EMC Directive is EU Directive 2014/30/EU on electromagnetic compatibility. It requires electrical and electronic equipment to keep the interference it sends out low and to cope with normal interference, and it has applied through each EU country's national law since 20 April 2016.

Is there an EMC certificate?

Not as a requirement. Under internal production control, which is always enough, the manufacturer assesses the product and signs an EU declaration of conformity. The only certificate in the directive comes from a notified body, on a route the manufacturer may choose.

Do I need a test lab to meet the EMC Directive?

The directive does not say who must test. It requires an EMC assessment and lists test reports in the technical documentation. A manufacturer can use an outside lab for the measurements, but the responsibility and the signed declaration stay with the manufacturer.

Does the EMC Directive apply to products with Wi-Fi or Bluetooth?

Not directly. Products that send or receive radio waves on purpose fall under the Radio Equipment Directive 2014/53/EU instead. That directive still requires an adequate level of electromagnetic compatibility as set out in the EMC Directive, so the same requirements apply.

What is the difference between emissions and immunity?

Emissions are the interference a product sends out, which must stay low enough for radios, telecoms and other equipment to keep working. Immunity is the product's ability to keep working while interference from other devices reaches it. The EMC Directive requires both.

Does the EMC Directive apply to companies outside the EU?

Yes, to every product they sell into the EU. The manufacturer's duties apply wherever it is based, and the Market Surveillance Regulation also requires an EU importer, authorised representative or fulfilment provider to answer to the authorities for each product.

How do harmonised standards help with EMC?

Harmonised standards hold the limits and test methods the directive itself does not give. A product that meets harmonised standards whose references are published in the EU's Official Journal is presumed to meet the requirements those standards cover, under article 13.

Who sets the fines for breaking the EMC Directive?

Each EU country. The directive names no amount, only that penalties must be effective, proportionate and dissuasive, and they may include criminal penalties for serious breaches. National market surveillance authorities can also force a withdrawal or recall.

Written by

Co-founder of Repax.io

Frederik Kiel is Co-Founder and Chief Technology Officer at Repax, where he architects technology solutions that bridge the gap between regulatory compliance and sustainable business practices. He focuses on building scalable infrastructure that transforms complex environmental responsibilities into actionable insights. With a commitment to better technology as a force for environmental stewardship, Frederik works at the intersection of compliance innovation and circular economy advancement.