A digital product passport must contain the data its product group's EU rules pick from the twelve items in Annex III of ESPR, Regulation (EU) 2024/1781, and once those rules apply the product cannot be sold without it.
The first passport most sellers will meet is the battery passport from 18 February 2027, with iron and steel, textiles and furniture planned after it. Below is what goes into a passport, which products need one and when, how to get one ready and who checks it.
Where your company is based decides who makes sure the passport exists.
Is your company established in the EU?
Pick your answer below for the right guidance.
Key facts about the digital product passport
These are the facts every requirement on this page rests on.
- The law. The Ecodesign for Sustainable Products Regulation (ESPR), Regulation (EU) 2024/1781, in force since 18 July 2024 and not amended since.
- What it is. A set of data about one product, reached through a code on the product (article 2(28)). The short definition is in the glossary entry on the digital product passport.
- Who needs one. Only products whose own EU rules ask for it. As of October 2026 no product group has those rules under ESPR yet.
- The first one. Batteries for electric vehicles, light means of transport and industrial batteries over 2 kWh, from 18 February 2027, under the Battery Regulation.
- The registry. The EU's digital product passport registry was set up in July 2026 and stores each product's identifier.
- Fines. Set by each EU country, with no EU amount.
The rules on this page come from EUR-Lex's text of the Ecodesign Regulation and EUR-Lex's text of the registry rules, Implementing Regulation (EU) 2026/1778.
What a digital product passport must contain
ESPR does not give one fixed list for every product. Annex III is a menu of twelve items, and the EU rules for each product group, called delegated acts, say which of them that product's passport must or may hold (article 9(2)).
The twelve items fall into four groups.
Product facts the passport can hold
The first item covers the information ESPR asks a product to carry, or that another EU law asks for (Annex III, point (a)).
- Performance. Scores and footprints, such as a repairability score, a durability score or a carbon footprint (article 7(2)).
- Use and repair. How to install, use, maintain and repair the product.
- End of life. How a recycler takes it apart, reuses or recycles it.
- Substances of concern. The name of each substance, where it sits in the product and in what concentration (article 7(5)).
User manuals, warnings and safety information required by other EU laws are a separate item (point (f)), and the manufacturer's digital instructions also go into the passport (article 27(7)).
Codes that identify the product
Three items let anyone, including a customs officer, match the passport to the product in front of them.
- The unique product identifier, a string of characters that also works as a web link to the passport (point (b)).
- The Global Trade Item Number (GTIN) of the product or its parts, under ISO/IEC 15459-6 or an equivalent (point (c)).
- Commodity codes, such as the TARIC code used in customs (point (d)).
Proof that the product complies
The passport can carry the compliance papers the product already needs, such as the EU declaration of conformity, the technical documentation or conformity certificates (point (e)). Where a passport exists, the technical documentation is made available through it (article 36).
The companies behind the product
Five items name who made, imported and answers for the product, and where it was made.
- The manufacturer, with its unique operator identifier and contact details (point (g)).
- Other companies in the chain, by their unique operator identifiers (point (h)).
- Facilities, by unique facility identifiers (point (i)).
- The importer, with its contact details and EORI number (point (j)).
- The EU-based contact that answers to the authorities under article 4 of the Market Surveillance Regulation or article 15 of the General Product Safety Regulation (GPSR) (point (k)).
The last item is the reference of the service provider that holds the passport's back-up copy (point (l)). A manufacturer may also add voluntary information, such as whether the product has the EU Ecolabel.
How a digital product passport must work
ESPR also sets how the passport is reached and kept (articles 10 and 11).

The code, called a data carrier, sits on the product, its packaging or the documents that come with it, and points to a unique product identifier that never changes. The data must be machine-readable, built on open standards and movable to another provider without lock-in.
Customers, repairers, recyclers and authorities get free access to the parts their access rights allow. No personal data about a customer goes in without their explicit consent, and the passport must stay available even if the company behind it goes bankrupt.
Which products need a digital product passport?
Three questions tell you whether a product needs a passport, and from when.
- Do EU rules for your product group ask for a passport?
Under ESPR a product needs one only when its group's delegated act says so (article 9(1)). On 13 October 2026, EUR-Lex listed no such act for any product group, so no product needs an ESPR passport today.
- Does another EU law ask for one?
Some passports come from other laws. The registry rules list batteries under the Battery Regulation, construction products, toys and detergents, each with its own law and dates (Implementing Regulation (EU) 2026/1778, article 1). The battery passport is the first one due.
- Is your product outside ESPR altogether?
ESPR does not cover food, feed, medicines, living plants and animals, or vehicles for the parts their own EU rules cover (article 1(2)). For products with an EU energy label, the Commission's working plan expects its energy label database, EPREL, to do the passport's job.
The company that makes sure the passport exists
Once a product's rules apply, the company that places it on the EU market must have the passport ready before it goes on sale.
Established in the EU. If you make the product or sell it under your own brand, the passport is yours to create and back up (article 27(1)), and to register in the EU registry (article 13(4)).
If you import it, you check before sale that the passport exists and add your own name and contact details to its public part (article 29).
Selling from outside the EU. When an EU importer brings your product in, it must make sure the passport and its back-up exist before sale (article 29), so it will need them from you. If you sell straight to EU customers yourself, the manufacturer's duties are yours.
At the border, whoever releases the goods into the EU must give customs the product's registration number from the registry (article 15(1)). The duty to have the passport cannot be handed to an authorised representative under ESPR (article 28(1)).
Six steps to get a digital product passport ready
The steps below take a manufacturer from "my product group has passport rules" to a product that may be sold. They apply only once those rules are in force for your product.
Step 1. Read your product group's passport rules
Each delegated act sets the details that ESPR leaves open (article 9(2)). Look for these six answers before you build anything.
- The data. Which of the twelve Annex III items are required and which are optional.
- The level. One passport per model, per batch or per single item.
- The code. Which data carrier to use, where it goes and how it looks.
- Access. Who may see which data, and who may add or change it.
- The sales page. How customers reach the passport before they buy, including online.
- How long. At least the product's expected lifetime.
Step 2. Collect the data from your supply chain
Most passport data comes from suppliers, not from your own desk. Material content, substances of concern, test results and the footprint figures are typically held further up the chain.
Ask for them in a form you can reuse, and keep the source of each figure. The data must be accurate, complete and up to date when the product goes on sale (article 9(1)).
Step 3. Give the product its identifier and its code
The product gets a unique product identifier and a data carrier, such as a QR code, that links to it. Both follow the ISO/IEC 15459 standards or an equivalent (article 10 and Annex III).
If a company or factory you need to name has no operator or facility identifier yet, you request one on its behalf, after checking that none exists (article 12).
Step 4. Host the passport and its back-up copy
You store the passport yourself or through a digital product passport service provider (article 11(c)). Either way, a back-up copy must sit with a service provider when the product is placed on the market (article 10(4)).
A service provider may not sell or reuse your passport data beyond the storage and processing you agreed (article 11).
Step 5. Register the identifier in the EU registry
You upload the product's identifiers to the registry, plus its commodity code for products that come in through customs (article 13). The registry then sends back a unique registration identifier.
Registration is done by a company that has verified its identity in the registry, and it can download a proof of registration at any time (Implementing Regulation (EU) 2026/1778, articles 8 and 9). The registration number is not proof that the product complies.

The same number travels with the goods. Whoever releases an imported product into the EU gives it to customs, which checks it against the registry before letting the product in.
Step 6. Share the code with sellers and keep the data current
Shops and online marketplaces must be able to show the passport to customers who cannot hold the product. Give them a digital copy of the code or the identifier free of charge, within five working days of a request (article 10(3)).
Keep the passport and the registration accurate for as long as the product's rules require. When a new passport is created for a product that already has one, the new passport links back to the original (article 11(d)).
What importers and sellers check on the passport
Other companies in the chain do not build the passport, but they check it.
- Importers make sure the passport and its back-up exist before the product goes on sale, and add their own contact details to its public part (article 29).
- Distributors check that the product is linked to a passport where its rules require one (article 30(2)).
- Shops and online sellers make the passport easy for customers to reach, including in distance selling (article 31(2)).
When each product group gets its passport
Only two dates are fixed in law. The rest come from the European Commission's own timeline on its digital product passport page, which it calls indicative.
- 19 July 2026. The deadline for the Commission to set up the registry (article 13). The Commission gives 20 July 2026 as the day it became operational.
- Q4 2026 (planned). Rules for iron and steel.
- 18 February 2027. Battery passports become mandatory for electric vehicle, light means of transport and industrial batteries over 2 kWh (Battery Regulation, article 77).
- Q2 2027 (planned). Rules for construction products under the Construction Products Regulation.
- Q3 to Q4 2027 (planned). Rules for textiles, aluminium and tyres.
- 2028 and 2029 (planned). Furniture, then mattresses.
A planned date is when the Commission expects to adopt the rules, not when they start to apply. ESPR delegated acts apply, as a rule, no earlier than 18 months after they enter into force (article 4(4)).

So if the steel rules are adopted on plan and follow that rule, steel products would need passports from 2028. Nothing about a later product group's start date is decided yet.
Fines and customs checks for a missing passport
ESPR sets no EU fine. Each country sets its own penalties, which must be effective, proportionate and dissuasive, and every country must at least be able to fine a company and exclude it for a time from public tenders (article 74).
The sharper check sits at the border. Customs may release a product into the EU only after matching its registration number and commodity code against the registry (article 15(2)), and that check is to run automatically within four years of the registry rules.
A good first step today is to find out whether any of your products sit in a group on the Commission's timeline, and which suppliers hold the data its passport would need.
Where Repax fits next to the digital product passport
A product that needs a passport also has packaging, and often electronics or batteries, that bring extended producer responsibility (EPR) duties. Those mean a registration, reports and fees in each EU country where you sell, as the guide to EPR registration in Europe explains.
Repax does not build, host or register digital product passports. That stays with the manufacturer and its passport service provider.
Selling in more countries than you're registered in?
Bring your list of countries to a 30-minute call. We show you what each one asks of you, and what Repax EPR takes off your desk.
- How many EU markets do you sell into?
- Do you import from outside the EU?
Frequently asked questions about the digital product passport
Below are the seven questions sellers ask most about what a digital product passport must contain.
What must a digital product passport contain?
It must contain the data its product group's EU rules select from the twelve items in Annex III of ESPR. These include performance, repair and recycling information, substances of concern, identifiers, compliance documents and the manufacturer, importer and EU contact.
Is the digital product passport mandatory in 2026?
Not under ESPR, because as of October 2026 no product group has passport rules yet. The first mandatory passport is the battery passport under the Battery Regulation, from 18 February 2027, for electric vehicle, light transport and large industrial batteries.
Which products will need a digital product passport first?
Batteries come first, from 18 February 2027. The European Commission plans rules for iron and steel next, then construction products, textiles, aluminium, tyres, furniture and mattresses. Those dates are indicative, and each ESPR rule normally applies at least 18 months after it enters into force.
Who creates the digital product passport?
The company that places the product on the EU market, usually the manufacturer. It hosts the passport itself or through a service provider, and a back-up copy must sit with a service provider. The product group's rules say who else may update it.
Does a digital product passport need a QR code?
It needs a data carrier, which can be a QR code, a barcode or another code a device can read (article 2(29)). The product group's rules say which one, and it goes on the product, its packaging or its accompanying documents.
Who can see the data in a digital product passport?
Customers, repairers, recyclers, other companies in the chain and authorities can see it free of charge, but only the parts their access rights allow. Those rights are set for each product group. Personal data about customers needs their explicit consent.
What is the digital product passport registry?
It is the EU database, set up in July 2026, that stores each passport's unique identifiers and, for imported products, the commodity code. Customs uses it to check a product before release, and its registration number is not proof of compliance.
