rePurpose Global sells two things side by side. One is packaging compliance in the seven US states their platform names as having active Extended Producer Responsibility (EPR) laws. The other is verified plastic recovery, the sustainability claim rather than the legal obligation.
This guide compares six rePurpose Global alternatives on markets covered, waste streams carried and what it costs to get in. Each one is measured on what it publicly covers today, not on what it says it aspires to.
Where rePurpose Global goes deep and where it stops
Their compliance product is built around North American packaging law, and it goes further into that rulebook than most tools bother to.
Their pages name Oregon, California, Colorado, Minnesota, Maryland, Washington and Maine as the states with active EPR laws, and Canadian deadlines appear in their product dashboard. Packaging gets sorted into more than 140 material categories so each state receives the classification it expects.
Four things make up what you buy.
- Obligation and deadline tracking. Their team works out which programmes apply to you, and the platform tracks the reporting dates from there.
- Fee calculation and forecasting. Once the packaging data is in, the system prices it and lets you model what next year looks like.
- Reports with a human on them. You get audit-ready reports mapped to each state, with compliance specialists reviewing the work and walking you through submission.
- The plastic side. Recovery projects in Indonesia, Colombia, India and Kenya turn into verified recovery claims, including their Plastic Neutral badge. Almost no EPR vendor sells this.
There is also a Packaging Simulator, which shows what changing a pack would do to your obligation before you change it. They point it at California's source reduction planning in particular.
The three limits worth knowing before you compare
Pricing is one flat fee, which is unusually simple for this market, but no figure is published and there is a size threshold to clear. Their site states eligibility as above 5 million dollars in global annual revenue, or above 1 million dollars of revenue in California.
Scope is the second limit. Packaging, paper and food serviceware are what the platform covers, so battery, electronics (WEEE) and textile obligations sit outside it.
The third is geography. Every jurisdiction their compliance product names is in North America. They publish country pages for European packaging EPR markets, but those pages explain the rules and invite a demo rather than describing an EU service the platform runs.
Six tools answer some or all of the same brief.
How the six alternatives compare
Each entry below covers what the tool is, who it suits, and the single clearest reason to choose it instead. Prices are as of August 2026.
1. Repax
Repax comes at the job from the data end. You describe each product and its packaging once, and that record answers whatever the next scheme asks for.
It is also our own product, so we lead with it where it wins, and we are straight about where it does not. Two parts are live today.
Core is the product specification database and report builder, turning one product record into whatever a scheme asks for. Declare issues signed EU Declarations of Conformity for packaging under PPWR Article 39.
Try Repax Core for free - no card required Describe your products once and Core builds the report each market and scheme expects. Try it freeA third part, Comply, runs registrations and submissions for you, built around EU markets. That is the honest gap here. rePurpose puts specialists on your submission in the US states they cover, while Comply is built around EU markets.
What you get in exchange is scope and a price you can read. Packaging, batteries, electronics and textiles all sit on the same product record, and our pricing is public with a free tier at 0 EUR a month, Growth at 29 EUR, Pro at 59 EUR and a custom enterprise tier, ex VAT.
We also do not sell plastic recovery claims, so if the badge matters as much as the filing, rePurpose covers ground we do not.
Choose it over rePurpose Global if you want every waste stream on one product record, a workflow your own team runs, and a price you can see before anyone calls you.
2. PCX Solutions
PCX Solutions is the closest thing to a like-for-like swap, because they also put compliance and plastic in one place.
Their platform maps packaging data to SKUs and business units, prepares and files the jurisdictional reports, calculates the fees and models source reduction scenarios before you change a pack.
The difference is reach. PCX names more than 49 EPR markets, covering US states and Canadian provinces, the EU and the United Kingdom, eight Asia Pacific countries, plus Turkey, Kenya and South Africa.
On the plastic side they help brands buy post-consumer recycled plastic, fund recovery projects and make verified claims, which is the same pairing rePurpose offers.
They are sold the enterprise way, with demo-only pricing and reference customers such as Johnson & Johnson, Colgate-Palmolive and Starbucks, so a smaller producer cannot simply sign up. Our best enterprise EPR compliance software roundup ranks that tier.
Choose it over rePurpose Global if you want the same compliance and plastic bundle but your packaging crosses well beyond North America.
3. Assent
Assent starts from the problem of getting packaging data out of suppliers, which is where most reporting stalls.
Their supplier engagement engine chases suppliers in their own languages until the materials, weights and recycled content percentages come back, then turns those attributes into report-ready outputs with fee estimations.
Their EPR packaging page is anchored in the same rulebook as rePurpose, naming California SB54, Oregon SB582, Colorado HB22-1355 and Canada's Federal Plastics Registry. Packaging is the stream it covers, and pricing is demo-only. Our Assent alternatives guide goes through the field around them.
Choose it over rePurpose Global if your obligations are North American too and the real bottleneck is prising packaging data out of a long supplier list.
4. Lorax EPI
Lorax EPI is the breadth play, a pure-play EPR specialist rather than a platform with an EPR module bolted on.
Their own homepage advertises over 200 schemes, and they carry packaging, WEEE, batteries and textiles rather than packaging alone. Around the software sit six services, including obligation assessment, data screening, fee modelling and a regulatory subscription.
One distinction matters when you are comparing them with a done-for-you vendor. Lorax will complete the registrations with schemes, national authorities and authorised representatives, but they make you compliance ready rather than submitting the reports for you.
Pricing is sales-led with no public figure. Our Lorax EPI alternatives guide compares them against the rest of the field.
Choose it over rePurpose Global if scheme coverage is the deciding factor and you need waste streams beyond packaging.
5. Source Intelligence
Source Intelligence treats EPR as one thread inside a broader supply chain compliance platform.
The platform is built for complex global producers reporting across many jurisdictions, and their EPR module carries packaging, batteries and WEEE.
The reason to shortlist them is rarely EPR by itself. It is that the same system already holds the rest of your product compliance work, so the supplier records feeding your other reporting feed the packaging numbers too instead of living in a separate tool.
Pricing is demo-only, and our Source Intelligence alternatives guide compares them with the rest of the field.
Choose it over rePurpose Global if packaging EPR is one obligation among many that you would rather run from a single platform.
6. ecosistant
ecosistant is the European end of this list, and the only one here besides Repax that publishes a price.
They cover up to 30 European countries and carry packaging under PPWR, WEEE, batteries, textiles, furniture and mattresses. Buying starts at 24.90 EUR per country, with a self-service tier and a premium tier that adds an account manager, plus a free check of which obligations apply to you.
Their limit is the mirror image of rePurpose. Europe is what they do, so North American state programmes are not part of the offer, and our ecosistant alternatives guide covers who else serves that market.
Choose it over rePurpose Global if your obligations are European and you want a published per-country price instead of a revenue threshold.
Seen together, the six sit at three different distances from the rulebook rePurpose Global goes deep on. Assent stays close to it, PCX Solutions widens to packaging across many markets, and the rest carry other waste streams as well.
Moving right along those tiers buys you reach. It also costs you the state-level depth rePurpose has built, and none of the wider tools sell plastic recovery claims.
Which alternative suits which producer
The right pick turns on where your obligations sit and how much of the work you want to keep. Find your situation below.
- Your exposure really is those seven states. rePurpose is a fair choice, and Assent is the other tool built around the same laws. PCX Solutions covers them too if you also need markets elsewhere.
- You sell into Europe as well. PCX and Lorax EPI both reach the EU and the UK, ecosistant covers Europe on a published price, and our best EPR software for EU compliance roundup ranks that field.
- You have batteries, electronics or textiles too. Packaging-only tools stop here. Repax, Lorax EPI and Source Intelligence carry the other streams, and the best multi-stream EPR software roundup compares them properly.
- You are under the revenue threshold. rePurpose asks for 5 million dollars of global revenue, or 1 million in California. Repax starts at a free tier and ecosistant at 24.90 EUR per country, and the best EPR software for small businesses roundup covers the cheaper end.
- You want the recovery claim as well as the filing. Only rePurpose Global and PCX Solutions sell both. Every other tool here stops at compliance.
- You want the work to stay in-house. Repax is built for the operations or finance lead who runs it themselves, on published pricing, so you can load a few products and see the reporting before booking anything.
Frequently asked questions about rePurpose Global alternatives
These are the questions that come up most when producers weigh rePurpose Global against the rest of the field. Short answers follow.
Is rePurpose Global any good?
Yes, for the job it is built for. They go deeper into US state packaging law than most vendors, sorting packaging into more than 140 material categories, forecasting fees, and putting compliance specialists on the submission.
Their limits are scope and access. Packaging is the only waste stream, no EU or UK programme is named as something the platform handles, and there is a revenue threshold to clear before you can buy.
What does rePurpose Global cost?
They promise one flat price but publish no figure, so the number comes out of a conversation. Eligibility is stated as above 5 million dollars in global annual revenue, or above 1 million dollars of revenue in California.
Of the alternatives here, only Repax and ecosistant publish prices, starting at a free tier and 24.90 EUR per country respectively.
Is there a cheaper or free alternative to rePurpose Global?
Yes. Repax has a free tier at 0 EUR a month with paid plans from 29 EUR, and ecosistant starts at 24.90 EUR per country. Both let you start without a sales call or a revenue threshold.
PCX Solutions, Assent, Lorax EPI and Source Intelligence are all quote-based, which in this market usually means enterprise pricing.
What is the best alternative to rePurpose Global?
It depends on what you need beyond US state packaging law. Repax is our pick if you want every waste stream on one product record and a platform your team runs, and PCX Solutions is the closest like-for-like if you want compliance and plastic recovery in the same place.
Lorax EPI wins on sheer scheme coverage, and ecosistant is the straightforward answer for European obligations.
Does rePurpose Global handle EPR outside North America?
Not according to their own product pages. Every jurisdiction they name is a US state or Canada, and while they publish guide-style pages for European packaging markets, those invite a demo rather than describing an EU service.
If your reporting spans both sides of the Atlantic, PCX Solutions and Lorax EPI are the two here that cover North America and Europe.
Which alternatives cover more than packaging?
Repax, Lorax EPI and Source Intelligence all carry waste streams beyond packaging. Repax and Lorax EPI cover packaging, batteries, electronics and textiles, and Source Intelligence covers packaging, batteries and WEEE.
ecosistant adds furniture and mattresses to that list for European markets. rePurpose Global, PCX Solutions and Assent are packaging-only.
