This guide walks your company through extended producer responsibility (EPR) registration in Estonia, from working out what you owe to the first yearly reports.
Packaging, electronics and batteries are covered step by step here, since they are the three most sellers owe among the eight streams Estonia regulates. A table near the end points to the rest.
How do I register for EPR in Estonia?
Estonia regulates eight waste streams. This guide covers packaging, electronics and batteries in full. All three go into two registers, both run by the Estonian Environment Agency (Keskkonnaagentuur).
- Packaging. PAKIS, the packaging register, takes no application and gives no number. Your recovery organisation reports you once a year, or you report yourself.
- Electronics. An application to PROTO, the register of products of concern, filed before you start selling.
- Batteries. A battery category in the same register, also in place before your first sale.
The agency registers you in PROTO within 12 weeks and sends a letter with your PRO number. Neither register charges a state fee, and neither lets a foreign company file directly.
Do you want help with EPR registration in Estonia? Repax EPR registers you market by market and files your reports, with an authorised representative where one is required. Explore Repax EPRWhat to gather first
Before you sign with an organisation or open PROTO, gather these five details and documents.
-
An electronic ID for the person who files
Both registers log you in with a high-assurance electronic ID, such as an Estonian ID card, Mobile-ID or Smart-ID.
-
A contract with a producer organisation
Required for sales packaging, household electronics and most batteries. The organisation then files for you.
-
Your products by category and brand
The equipment category, the brand you sell under, your start date and whether it is for households. For batteries, the chemistry.
-
Your packaging weights by material
The mass of packaging you place on the Estonian market, single-use and reusable, per material.
-
A written mandate for an Estonian representative
If you sell direct to Estonian end users from abroad. The representative accepts the mandate in writing.
The one question that decides your whole route
To guide you the best way, it helps to know where your company is based, because the steps are not the same for a company set up in Estonia as for one selling into Estonia from abroad.
Is your company based in Estonia or abroad?
Pick your answer below for the right guidance.
If your company is based abroad, it also matters who buys from you:
- An Estonian business. The business that brings your goods into Estonia is the producer, so it registers and joins the organisations.
- An end user, consumer or business. You are the producer, and your Estonian representative carries every registration for you.
Estonia's two registers open only to Estonian companies
Every EU country keeps its own producer registers, and how to register for EPR in Europe covers what they share. Estonia splits them by product.
Packaging goes to PAKIS under the Packaging Act. Everything else under EPR in Estonia goes to PROTO under the Waste Act, from electronics and batteries to tyres and vehicles.
PROTO says so on its own front page: only Estonian companies register and submit data directly. A company abroad gets in through its Estonian representative.
Below are Estonia's three registrations side by side, with fees as published in October 2026.
| Registration | Who files from abroad | Time and cost |
|---|---|---|
| PAKIS, packaging | Your Estonian buyer on sales to businesses. On direct sales, your Estonian representative | No application. No state fee |
| PROTO, electronics | Your Estonian buyer, or your Estonian representative on direct sales | Up to 12 weeks. No state fee |
| PROTO, batteries | Your Estonian buyer, or your Estonian representative on direct sales | Up to 12 weeks. No state fee |
Since December 2025 an online marketplace may register as the producer for the sellers on it. Since 1 January 2026 household electronics and most batteries must go through a producer organisation.
Since 17 January 2026 sales packaging needs a contract with a recovery organisation too. And since 19 July 2026 the agency has 12 weeks to register a complete PROTO application.

A 6-step guide to EPR registration in Estonia
This guide takes you from the first check, whether Estonia counts you as the producer, to a PRO number in PROTO and a place in your recovery organisation's PAKIS report. The steps run in the order the waiting times set, and each one ends with what you should have in hand before you move on.
Step 1. Confirm Estonia counts you as the producer
Estonia counts you as the producer when you are the first to make a product available on the Estonian market.
For packaging, that means packing goods, bringing packaged goods into Estonia or selling them there. Every packaging company declares what it places, however little.
For electronics, you make or brand equipment sold in Estonia, first bring it in, or sell it at a distance to Estonian users. Batteries follow the EU Battery Regulation's test, built-in batteries included.
You are done when you can name your streams and your role in each.
Step 2. Work out which Estonian registrations you owe
Each stream ends somewhere different, and one boxed device can touch all three.
- Packaging. A contract with a licensed recovery organisation for sales packaging, which reports you to PAKIS. Transport and grouped packaging you may manage yourself.
- Electronics. A PROTO registration, with household equipment run through a producer organisation.
- Batteries. A battery category in PROTO, with a producer organisation for every type except car batteries.
Deposit drinks go through Eesti Pandipakend, the deposit operator. Agricultural plastic also registers in PROTO, and the other four streams are in the table below the steps.
Step 3. Decide who files each Estonian registration
The answer turns on where you are based and who buys from you.
Established in Estonia. Your producer organisation files you in PROTO and reports your packaging to PAKIS. Without one, for transport packaging, business equipment or car batteries, you file yourself.
Selling to Estonian businesses from abroad. The business that brings your goods into Estonia is the producer. It registers and joins the organisations.
Selling direct to Estonian end users from abroad. Estonian law makes a representative located in Estonia mandatory for every stream, and PROTO registers you only through it. How to appoint an EPR authorised representative walks the mandate.
Step 4. Gather what PROTO and PAKIS ask for
PROTO asks for the most, because it is the only one with an application.
- Your company. Name, register code or other company ID, postal address, website and a contact person.
- Your representative. Its name, register code and address, the mandate's start and end, and its confirmation that you appointed it.
- Your products. Category, brand, start date and whether equipment is for households. For batteries, the chemistry.
- Sales abroad. Which other EU countries you sell to at a distance, and your representative there.
- Your guarantee. For household equipment and for batteries, how your waste costs stay covered if you stop trading.
For packaging, your organisation needs your weights per material. Without an organisation, PROTO also wants a waste plan with your contracts.
Step 5. Register in the order the waiting times set
PROTO comes first, because the agency can take 12 weeks.
- Appoint your representative if you sell direct to end users from abroad.
- Sign with a producer organisation for each stream that needs one.
- Get into PROTO before you start. Your organisation files you, or you apply.
- Wait for the letter with your PRO number, and check your name on the public list.
- Confirm your packaging contract before the first sales packaging goes out.
You are done when you hold your PRO number and a signed packaging contract.
Step 6. Do what the registration makes due next
PROTO wants last year's figures by 31 January, and PAKIS by 31 March. If you are a member, your organisation files both for you.
Above 20 tonnes of packaging a year, an auditor checks your figures, with the summary due by 1 September. After a clean summary, you skip the next three years.
Outside a recovery organisation, missed recovery targets mean packaging excise to the Tax and Customs Board, declared by the 15th of the month after the quarter. How to do EPR reporting walks the cycle.
The other streams Estonia regulates
Beyond packaging, electronics and batteries, Estonia puts producer duties on five more streams. Agricultural plastic registers in PROTO, like electronics.
Below are the other four, each with a page that goes deeper.
| Stream | Register | Read more |
|---|---|---|
| Vehicles | PROTO, for vehicles and their parts | Vehicles EPR in Estonia |
| Tyres | PROTO, with a producer organisation contract required | Tyres EPR in Estonia |
| Single-use plastics | PROTO, for wet wipes, balloons and tobacco filters. Cups and food containers count as packaging | Single-use plastics EPR in Estonia |
| Fishing gear | PROTO, for fishing gear containing plastic | Fishing gear EPR in Estonia |
PROTO and PAKIS figures from one product record
There are two ways through the work above, and both rest on the same product data.
Run the filings yourself
Estonia asks for your products in two places. Equipment and batteries go into PROTO's yearly figures, while packaging weights go to your recovery organisation for PAKIS.
Repax Compliance OS keeps one record per product, broken down to each material and component. It takes your sales in through integrations or order imports and turns them into the figures each report and organisation asks for.
A boxed device with a battery is described once, and its packaging, equipment and battery lines each land in the right report.
Every product ready for every market Describe each product once. Your EPR reports and packaging declarations read from it. Explore Compliance OSOr hand the filings over
If you sell direct to Estonian end users from abroad, Repax EPR is the managed route, linked at the top of this guide. Producers register and report through Repax market by market, with an Estonian representative where one is required.
The Estonian detail to know is the login. Both registers need a high-assurance electronic ID, so a company abroad works through its representative, whoever runs the rest.
6 common mistakes when registering for EPR in Estonia
Below are six mistakes that cost producers time or a fine in Estonia.
-
Logging in from abroad
Trying to open PROTO or PAKIS as a foreign company. The registers take Estonian companies, so a producer abroad gets in through its Estonian representative.
-
Waiting for a packaging number
Holding back sales until PAKIS issues a number. PAKIS issues none, so your proof is your recovery organisation's contract and its report naming you.
-
Applying to PROTO at launch
Leaving the application to the week of the first sale. It goes in before you start, and the agency has up to 12 weeks to register you.
-
Handling sales packaging alone
Skipping the recovery organisation for consumer packaging. Since 17 January 2026 sales packaging needs a contract, and only transport and grouped packaging may be self-managed.
-
Reading the deposit as the duty
Deposit drinks go through Eesti Pandipakend. Every other package your company sells still goes through a recovery organisation.
-
Missing the January deadline
Planning around the PAKIS date of 31 March. PROTO's yearly figures are due two months earlier, by 31 January.
Frequently asked questions about registering for EPR in Estonia
Below are the five questions producers ask most often about registering for EPR in Estonia.
How long does this take?
PROTO registers you within 12 weeks of a complete application, which must go in before you start selling. Packaging has no application, since your recovery organisation reports you to PAKIS once a year.
Do I need a company or an address in Estonia?
Not a company. Selling to Estonian businesses, your buyer registers. Selling direct to Estonian end users, you need a representative located in Estonia for every stream, and the registers accept you only through it.
Does PAKIS give me a packaging number?
No. PAKIS is a reporting register with no application and no number. Your recovery organisation reports your packaging under your name, and the PRO number from PROTO covers electronics and batteries only.
Can Repax register for me?
Yes, through Repax EPR. It runs your Estonian registrations and reports, with an Estonian representative where you sell direct to end users from abroad.
What happens if I sell in Estonia without registering?
Under EU law, batteries may not be sold unregistered. Estonia fines the duty behind the registration: breaking the take-back and recovery duty can cost a company up to 200,000 euros, plus a levy of up to 32,000 euros.
